Model B10/77 Particle Measurement
Sensor from Analytical Technology

Turbidity monitoring of filtered potable water provides an excellent indicator of water clarity as well as a reliable measure of general filter efficiency. Recent studies, however, indicate that particle count data can provide additional information concerning filter operation and often can provide an early warning of filter breakthrough before turbidity values begin to rise. In addition, particle count data can indicate breakthrough of particle in the Cryptosporidium (5-7 micron) or Giardia (9-11 micron) size ranges before any change in turbidity can be detected.

Many commercial particle sensors are designed to provide large amounts of particle information to the user, including data on particles of various sizes and particle within particular size range. However, it is not uncommon to find particle counters users relying primarily on the total count data calculated by the system. ATI's Model B10/77 is a simplified particle sensor providing only one channel of particle measurement. The sensor operates from unregulated 12 VDC power supplies and provides a single isolated 4-20 mA output proportional to particle counts for all particles 2 microns and above. The span of this output is operator selectable for ranges from 0-100 counts/ml up to 0-10,000 counts per ml. In addition, a relay output is available to provide a simple alarm when particle concentrations exceed a preset limit. As with the span of the analog output, this alarm setpoint is easily adjustable.

Particle sensors require relatively little in the way of operator maintenance or adjustment. Sensors are factory calibrated and do not require field adjustment. The only requirement is that sample flow be maintained at 60 cc/min. This can be done conveniently using an optional constant head flow control that can be supplied as part of the sensor assembly. The flow controller also serves as a degassing chamber to remove entrained air, which can cause inaccurate particle measurements. For samples coming directly from a pressurized line, a rotameter on the outlet of the sensor can be used to set the proper flowrate.

B10/77 Particle sensors are ideal for any monitoring applications where only total particle measurement is desired. It is especially well suited for simple alarming applications where filter breakthrough could result in a rapid increase in particle counts. It is also useful for providing a total particle signal for comparison with turbidity measurement on filter effluent samples.

A unique feature of the B10/77 sensor is an easily removable measuring cell. Since deposits can degrade particle sensors over time, the cell can be easily removed for cleaning. And because all cells are interchangeable, a spare cell can be inserted in seconds so that monitoring can continue while cell cleaning is done at your convenience.

New Products | Air Sampling | Gas Detection | Other Meters | Respiratory | Water Quality | WMD HazMat
Applications | Product Specials | Rentals | Links | Index | Contact Us | Home

AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826
eMail: sales@afcintl.com

Last Revised: 1/23/07