| Detector |
Photo ionization detector with 10.6 eV lamp standard, 9.8 eV or 11.7 eV lamps optional |
| Battery |
Rechargeable 2.4V 1100 mAh, Ni-Cad battery pack or 2 AA alkaline battery adapter. Battery charger, 10 hours through charging station |
| Operating Hours |
10 hours continuous for continuous operation |
| Attachment |
Pocket/belt clip |
| Display |
8 digit LCD with LED back light |
| Key Pads |
1 operation key and 2 programming keys |
| Direct Readout |
VOCs as parts per million by volume |
| Peak high and low values |
| STEL and TWA values for VOC gases |
| Battery and shut down voltage |
| Elapsed time |
| Alarm |
90 bB buzzer and flashing red LED to indicate exceeded limits: |
| High: 3 beeps and flashes per second |
| Low: 2 beeps and flashes per second |
| STEL and TWA: 1 beep and flash per second |
| Automatic reset or latching alarms with manual override |
| Additional diagnostic alarm and display message for low battery and pump stall |
| Datalogging |
Optional 4,000 points downloadable to PC with serial number of unit, user ID, site number, calibration and check calibration time, date and value |
| Calibration |
Two point field calibration for zero and gas span |
| Temperature |
-4 to 113°F |
| Humidity |
0 to 95% relative humidity (non-condensing) |
| Intrinsic Safety |
UL & cUL Class I, Division I, Group A, B, C, D, EEx ia IIC T4 |
| Size |
6" L x 1.75" W x 1.0" H |
| Weight |
6.4 ounces |
| Warranty |
Lifetime on non consumable parts, 1 year on sensor and consumable parts, 1 year on battery |