.
WMD Banner
Industries Served

• Industrial
• Fire
• Industrial Hygiene
• Law Enforcement
• Hazmat
• WMD
• Waste Water Treatment
• Refineries
AFC Logo
Home > Respiratory Protection > Simultan Test CO2

Simultan Test CO2 from Draeger Safety

Simultan Test CO2

The quality of the carbonic acid can be tested of quantitative measurements of the contaminations.

Quick check the measurement time in 5 minutes. The measuring device, barbed nipple can be connected to the low pressure carbonic acid supply systems.

Draeger tubes are used for quantitative measurement of ammonia, NOx, PH3, CO, SO2, H2S and water vapor and other contaminants in carbonic acid.

All components of the SimultanTest CO2 are arranged in a carrying case and ready for use.

Specifications

Pressure 200/300 bar
Flowmeter Settings 0.2 LPM or 4.0 LPM
Connection G 5/8
Contaminants Detected Ammonia, Nitrous Fumes, Phosphine, Carbon Monoxide, Sulfur Dioxide, Hydrogen Sulfide, Water Vapor

Measuring Range

Tube
Measuring Range
Ammonia
0.6 - 9 ppm
Carbon Monoxide
5-50 ppm
Hydrogen Sulfide
0.2-5 ppm
Nitrous Fumes
0.5-10 ppm
Phosphine
0.1-4 ppm
Sulfur Dioxide
1-25 ppm
Water Vapor
5-250 mg/m3

Ordering Information

Each Simultan Test CO2 kit includes measuring device for 7 tubes, timer, tube breaker, manual, case and tubes listed below. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
Description
Catalog No.
Simultan Test CO2
6526170
Ammonia 2/a Tubes
6733231
Nitrous Fumes 0.5/a Tubes
CH29401
Phosphine 0.1/a Tubes
CH31101
Carbon Monoxide 5/a-P Tubes
6728511
Sulfur Dioxide 1/a Tubes
6728491
Hydrogen Sulfide 0.2/a Tubes
8101461
Water Vapor 5/a-P Tubes
6728531

Downloads

General Aerotest datasheet

Simultan Test CO2 datasheet
Last Revised: 5/6/09