The Handy Pak is ideal for use in confined spaces, HazMat response, tank entry and cleaning, sewer maintenance and chemical handling operations among other applications. It can serve as a primary air source by using cylinders for breathable air or when using an eternal high pressure source (e.g. a compressor), the cylinders can provide air for emergency egress.
Any SCBA type cylinder can be used with the Handy Pak. The CGA 347 fitting which is standard and permits use of either low or high pressure cylinders (up to 4500psi).
The Handy Pak features an adjustable regulator, 4 quick connect outlets and a low pressure alarm whistle. When using 2 cylinder, both can be opened for simultaneous use, or only one can be operational allowing for changeout of the second cylinder.
Handy Pak is lightweight and designed for portability. It can easily be carried via hand to the worksite to provide breathable air in a confined space or hazardous environment. Or it can be wall mounted with an optional bracket.
Specifications
Weight
26 pounds without cylinders
Dimensions
29.5"L x 21"W x 6.5"D
Air Distribution
Regulated 4 Hansen brass quick disconnect outlets, others available
Frame
Lightweight aluminum with 2 carry handles. Blue powder coat paint.
Regulator
0-5,000 psi incoming 0-125 psi outgoing
Relief Valve
125 psi ASME preset
Warning Alarm
Pneumatic whistle for low pressure warning, set at about 500 psi
Check Valves
Allows independent cylinder operation and removal without complete system shut-down
High Pressure Inlet
Handles a third incoming air source from an external supply
Bleeder Valves
Allows depressurization of hand tight nut before cylinder removal
Bottle Straps
4 each, adjustable with Velcro, to accommodate different size cylinders
Whip Assemblies
Thermoplastic 5,000 psi rated 4:1 safety factor
Flow Rate
Primary regulator 80 cfm (2,260 LPM) @ 120 psi
Intrinsic Safety
No electronic devices to cause a spark
Rescue Pak
The Rescue Pak is ideal for use in confined space, HazMat response, tank entry and cleaning, sewer maintenance and chemical handling operations among other applications. It can serve as a primary air source by using cylinders for breathable air, or when using an external high pressure source (e.g. a compressor), the cylinders can provide air for emergency egress.
Any SCBA type cylinder can be used with the Rescue Pak. The CGA 347 fitting which is standard and permits use of either low or high pressure cylinders (up to 4500 psi). A directional valve in the pneumatics ensures only one cylinder at a time is supplying air.
The Rescue Pak features an adjustable regulator for 4 quick connects outlets, a second regulator for a 5 quick connect outlet and a low pressure alarm whistle. The fifth air connection with its dedicated regulator provides air at a different, lower pressure than to the respirators. This connection is ideal for pneumatic tools.
The Rescue Pak has a lightweight frame with 8" ball bearing wheels and a telescopic handle for the ease of movement and portability. The telescopic handle provides compact storage in the down position. On the rear of the Rescue Pak, up to 50' of the supplied airline hose can be stored.
Specifications
Weight
56 pounds without cylinders, 67 pounds with optional cover
Dimensions
37"L x 27"W x 14.5"D
Air Distribution
Regulated 4 Hansen brass quick disconnect outlets, others available, and 1 independently regulated Hansen brass quick disconnect outlet which provides air at lower pressure than that set on the primary regulator
Frame
Lightweight aluminum with 2 carry handles. Blue powder coat paint, rear hose rack to hold up to 50' of hose
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
