Multi-Regulator Air Filtration Panels
from Allegro Safety
Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. A CO monitor is integrated to meet OSHA requirements for continuous monitoring of carbon monoxide levels. The panel provides up to 60 CFM of air within 5-125 psi range. The unique design of this panel allows each regulator to be individually adjusted at different pressure settings, allowing as well, separate outlets for air tools. The viewing window on the case allows monitoring of pressure gauges. A 16 gauge steel stand for support is included as well as all brass plumbing with quick disconnect Hansen couplers.
Specifications
Construction
Pelican case with handle, acrylic window, black powder coated, 16 gauge steel stand, brass plumbing with quick-disconnects
Individual, high pressure, zinc body, acetal adjusting knob, ABS cover, brass/nitrile valve with a 0-160 psi pressure gauge and an external relief valve set at 125 psi
Flow Meter
Clear acrylic, Teflon float with adjustable metering valve, graduations from 0.0-1.0 LPM
Dimensions
4 Worker: 21" x 6.75" x 14.5", 21 pounds
6 Worker: 23" x 7.5" x 16.5", 27 pounds
Ordering Information
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
The Remote CO Alarm System is attached to any air source or filter panel and alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm. The CO monitor can be operated in AC or DC mode and uses a single 9 volt alkaline battery. The maximum regulator inlet pressure is 150 psi and comes with coupling pigtail.
Ordering Information
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
Description
Catalog No.
Remote CO Alarm
9871-02
Point of Attachment Air Control System
This Point of Attachment (POA) Air Control System connects to any breathing air source. It's housed in a Pelican carry case that can be wall mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure in 150 psi.
Specifications
Relief Valve
Pop-Safety, brass material, spring loaded (external)
Maximum Temperature
150°F
Maximum Pressure
300 psi
Flow Capacity
82 scfm
Inlet Fittings
1/2" quick connect steel Hansen plug
Outlet Fittings
1/4" quick connect brass Hansen coupler
Manifold
Zinc
Adjusting Knob
Acetal
Body Cap
ABS
Valve
Balanced valve design, brass/nitrile
Diaphragm
Spring loaded, nitrile/zinc
Pressure Gauge
Analog, CBM, 0-160 psi, 1 1/2" dial face
Ordering Information
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
