AreaRae Inert is a one to five sensor gas detector equipped with a wireless RF (radio frequency) modem which allows the unit to communicate real time sensor readings with a remotely located host controller PC. Wireless remote monitoring ensures worker safety, while sensitive sensing technology measures toxic and flammable gases in inert atmosphere without the need for dilution fitting.
Features
- Increase safety with remote monitoring
- Easy to use sensing technology
- Rapidly deployable system up in minutes
- Designed for use in harsh & hazardous environments
- Up to fine sensors including a PID, LEL, oxygen and two toxic gases
- Rugged, weather resistant stainless steel housing
- Built in modem for data transmission up to 2 miles
- Over 18 hours of run time on interchangeable Lithium-ion battery
- Loud buzzer and large, extra bright warning light
- Large LCD display and keypad
- Datalogging on the host PC and on the AreaRae
- Optional GPS provides ability to track units
- Easily switch between INERT and NORMAL operation modes
Applications
- Catalysts replacement
- Confined space entry
- Fence line monitoring
- Hazardous material response
- Environmental cleanup
Sensor Specifications
| Sensor |
Range |
Resolution |
| Oxygen |
0-30% |
0.1% |
| Combustible Gas |
1-100% LEL |
1% |
| VOCs |
0-199 ppm |
0.1 ppm |
|
200-2,000 ppm |
1 ppm |
Carbon Monoxide/
Hydrogen |
10 - 2,000 ppm |
10 ppm |
| Hydrogen Sulfide |
0-100 ppm |
1 ppm |
| Sulfur Dioxide |
0-20.0 ppm |
0.1 ppm |
| Nitric Oxide |
0-250 ppm |
1 ppm |
| Nitrogen Dioxide |
0-20.0 ppm |
0.1 ppm |
| Chlorine |
0-10.0 ppm |
0.1 ppm |
| Hydrogen Cyanide |
0-100 ppm |
1 ppm |
| Ammonia |
0-50 ppm |
1 ppm |
| Phosphine |
0-5.0 ppm |
0.1 ppm |
| Hydrogen Chloride |
2 to 15 ppm
|
1 ppm
|
| Hydrogen Fluoride |
2 to 10 ppm
|
1 ppm
|
Specifications
| Detector |
Up to 5 sensors (oxygen, combustible, two toxic and VOC) electrochemical sensors for toxic gases and oxygen, PID sensor for VOCs, catalytic sensors for combustible gases. |
| Operating Hours |
Up to 18 hours continuous operation |
| Battery |
Rechargeable, 7.4V/4.5 Ah, Lithium-Ion battery pack with built in charger or a 6 C cell alkaline battery pack |
| Battery Charger |
Less than 10 hours charge thorough built-in smart charger |
| Display |
2 line, 16 digit LCD with manually activate LED back light
|
| Audible Alarm |
110 dB buzzer at 10 cm (typical) |
| Visual Alarm |
Flashing red LED cluster |
| Data Storage |
20,000 readings (64 hours, 5 channels at 1 minute intervals) in non volatile memory |
| Datalog Interval |
Programmable 1-3,600 seconds |
| EM Immunity |
No effect when exposed to 0.43 mW/cm2 RF interference (5 watt transmitter at 12") |
| Calibration |
Two point field calibration for fresh air and standard reference gas |
| Sampling Pump |
Internal integrated diaphragm pump with programmable "High" (400cc/min) and "Low" (300cc/min) flow rate settings |
| Low Flow Alarm |
Auto shut off at low flow condition |
| Temperature |
-4 to 113°F |
| Size |
9.25" x 5.0" x 9.25" |
| Weight |
8.5 pounds |
| Optional |
Integrate GPS receiver |
| Approvals |
CSA: Class 1, Division II, Groups A, B, C, D with 900 MHz modem |
| Frequency |
902 to 928 MHz (License free) |
| RF Range |
Up to 2 miles |
Ordering Information
Each AreaRae Inert Gas Detector includes sensors as specified, filters, calibration adapter, manual, shoulder strap, rechargeable Li-Ion battery pack & charger, alkaline battery pack, spare external filters, hard transport case, Teflon tubing, and tool kit. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
Downloads
Table of Ionization Potentials
What is a Photo Ionization Detector?
PID Training Outline
Correction Factors, Ionization Energies and Calibration Characteristics
PIDs as a HazMat Response Tool
PIDs as an Arson Response Tool
Guide to Atmospheric Testing in a Confined Space
Using PIDs in Terrorist Chemical Attacks
PIDs in Clandestine Laboratories Applications
PIDs for Continuous Monitoring of VOCs
Using PIDs for Indoor Air Quality Surveys
Environmental Applications for PIDS
Using PIDs for Assessment of Exposure Risk in Unknown Environments
Understanding AreaRae Options
Use of AreaRaes for Fenceline Monitoring
Facility and Venue Protection
AreaRaes for Incident Response and Law Enforcement
Nerve Agent Measurement by PID
Sharing AreaRae Assets
Decontamination Procedures for Monitors Exposed to Chemical Warfare Agents
Basics of Wireless Security
Sensor Specifications and Cross Sensitivies
AreaRAe Inert for Inert Gas Confined Space Entry
AreaRae Multi Gas Detector Datasheet