A PID sensor is now available for the Draeger X-am 7000. This smart plug and play sensor is intended for use in confined space entry and area monitoring applications. The PID sensor can used in sample draw of diffusion configurations. This sensor employs a 10.6 eV lamp to monitor a wide range of VOC's from 0 to 5,000 ppm depending on the gas selected with a 1 ppm resolution.
Draeger X-am 7000 is an innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The Draeger X-am 7000 can be equipped with three electrochemical and two catalytic bead or infrared sensors. It is the ideal companion in a great number of application where reliable monitoring of oxygen, toxic and combustible gases and vapors in the ambient air is necessary.
Flexibility through Sensor Variety - The extensive portfolio of over 25 different DraegerSensors allows the detection of more than 100 gases and vapors. The measuring range of the EC, Cat-EX and IR sensors can be changed to another gas within a list of gases by a push of a button - without the necessity of recalibrating. This way the accuracy and the range of the monitored substances is increased. DraegerSensors are renowned for fast response, minor cross sensitivities, high accuracy and long life.
Intelligent and Interchangeable Sensors - Each sensor is recognized automatically by the instrument. All sensors are precalibrated and a reconfiguration of the Draeger X-am 7000 is done by simply changing a sensor. No additional service or maintenance is necessary.
Intuitive Software Functions - The software menu of the Draeger X-am 7000 was designed in partnership with our customers making it simple and easy to use. With the help of CC-Vision software, up to 5 different detection applications can be saved within the instrument By doing so, the use of different instrument configurations can be set for that specific application. During operation, a simple change between these set parameters can be done via the instrument's menu.
Easy Detection of Leakages - A new, flexible goose-neck probe simplifies the search for leaks at e.g. flanges, shut-off devices and valves. In the tracking mode, the instrument generates an increasing or decreasing rate of beeps, depending on the gas concentration detected.
Rugged and Waterproof - Additional to the built in dust and splash water protection, the Draeger X-am 7000 can be submersed without damage. A specially designed rubber boot protects the instrument against damage from a drop of 5 feet.
Built for Longevity - The completely new design of the rechargeable battery block with intelligent charging management guarantees full functionality of the instrument over a period of up to 20 hours (depending on the battery type). An alkaline battery pack is also available. The DraegerSensors used in the Draeger X-am 7000 have a typical life of over 5 years. If, in time, an exchange is necessary, the modular approach of the instrument allows this in a few simple steps.
Multiple Warning Systems - Alarm conditions can not be ignored because of the sound of an extremely loud multi tone horn. In addition the visual alarm can be seen through 360° ensuring it attracts the users attention. By generating an optional life signal every six seconds the Draeger X-am 7000 confirms it is functioning normally.
Information at a Glance - The large graphic display and the alarm auto zoom function guarantee easy recognition of the values and symbols displayed for immediate judgment about the situation or hazards. All information is provided in plain text.
Data Management - A built in data memory logs up to 3,000 sets of values - that is data logging of 100 hours when recording one set per minute. The data can be transmitted and evaluated on a PC using an infrared interface together with the GasVision software package.
Strong Integrated Pump - The built in high power pump allows to sample gas through a 45M long tube. The operation of the pump is continuously monitored and the instrument will generate an alarm if the flow is too low.
Draeger E-Cal Compatible - E-Cal provides automatic calibration and documentation of instrument service records.
Approvals - Draeger X-am 3000 has worldwide approvals: UL, ATEX, CSA, MSHA
Instrument Specifications
| Battery |
NiMH (4.8V/3.0 Ah); >9 hours |
| NiMH (4.8V/6.0 Ah); >20 hours |
| Alkaline; >20 hours |
| Alarms |
Visual: 360º, flashing LEDs
Audible: > 100 dB at 1 foot |
| Temperature |
-5 to 105°F, intermittent + 130°F |
| Pressure |
700 to 1300 hPa, 20.7 to 38.4" Hg |
| Humidity |
10 to 95% Rh |
| Case |
IP 67 |
| Charging Time |
3.5 to 7 hours, depending on battery type |
| Pump Mode |
Maximum length of tubing 150' |
| Size |
5.9" x 5.6" x 3" |
| Weight |
21 ounces |
| Approvals |
UL: Class 1, Div 1, Groups A, B, C & D, Temp Code T4
ATEX: II 2G EEx ia d IIC T4; -25<Ta<55°C, I M2 EEx ia d I
CSA: Class I, Div 1, Groups A, B, C & D, Temp Code T4
CE Mark: Electromagnetic compatibility |
Sensor Specifications
| Gas |
Range |
Catalog No. |
| Carbon Monoxide XS 2 |
0-2,000 ppm
|
6810365 |
| Carbon Monoxide XS EC |
0-2,000 ppm |
6809105 |
| Carbon Monoxide XS R |
0-2,000 ppm |
6810258 |
| Carbon Monoxide XS EC HC |
0-10,000 ppm |
6809120 |
| Hydrogen Sulfide XS2 |
0-100 ppm |
6810370 |
| Hydrogen Sulfide XS 2 SR |
0-100 ppm |
6810575 |
| Hydrogen Sulfide XS EC 100 |
0-100 ppm |
6809110 |
| Hydrogen Sulfide XS EC HC |
0-1,000 ppm |
6809180 |
| Hydrogen Sulfide XS R |
0-100 ppm |
6810260 |
| Oxygen |
0-25 Vol % |
6810375 |
| Oxygen XS EC 100 |
0-100 Vol % |
6809550 |
| Oxygen XS EC LS |
0-25 Vol % |
6809130 |
| Oxygen XS R |
0-25 Vol % |
6810262 |
| Amine XS EC |
0-100 ppm |
6809545 |
| Chlorine XS EC |
0-20 ppm |
6809165 |
| Chlorine Dioxide XS EC |
0-20 ppm |
6811360 |
| Carbon Dioxide XS EC |
0-5 Vol % |
6809175 |
| Phosgene XS EC |
0-10 ppm |
6808582 |
| Hydrogen XS EC |
0-2,000 ppm |
6809185 |
| Hydrogen XS EC HC |
0-4 Vol % |
6811365 |
| Hydrogen Cyanide |
0-50 ppm |
6809150 |
| Hydride XS EC |
0-20 ppm |
6809135 |
| Ammonia XS EC |
0-300 ppm |
6809145 |
| Nitric Oxide XS EC |
0-200 ppm |
6809125 |
| Nitrogen Dioxide XS EC |
0-50 ppm |
6809155 |
| Odorant XS EC |
0-40 ppm |
6809200 |
| Organic Vapor XS EC |
0-200 ppm |
6809115 |
| Organic Vapor-A XS EC |
0-100 ppm |
6809522 |
| Phosphine XS EC HC |
0-1,000 ppm |
6809535 |
| Sulfur Dioxide XS EC |
0-100 ppm |
6809160 |
| Smart Infrared EX |
0-100 % LEL
0-100 Vol % CH4 |
6810460 |
| Smart Infrared Carbon Dioxide |
0-5 Vol % |
6810590 |
Smart Infrared
Carbon Dioxide |
0-100 Vol % |
6810599 |
| Smart Cat EX |
0-100 % LEL |
6810710 |
| Smart Cat EX HC |
0-100 %LEL
0-100 Vol % CH4 |
6810410 |
| Smart CatEX FR |
0-100 % LEL
0-100 Vol % CH4 |
6811430 |
| Smart PID |
0-2,000 ppm |
8319100 |
Ordering Information
Many X-am 7000 versions are available including an infrared hydrocarbon sensor and infrared carbon dioxide sensor. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com,
Downloads
X-am 7000 literature