The HXG-3 is an advanced state of the art combustible gas leak detector capable of sensing many combustible gases such as methane, propane and natural gas. The backlit LCD display shows percent lower explosive limit (LEL) and part per million (ppm readings simultaneously for accurate leak detector and analysis. Audible and visual alarms warn of potential hazardous conditions.
Leaks Easily Pinpointed - Leaks can easily be pinpointed by using an audible tick rate. The sensor is located at the end of a flexible gooseneck to easily reach areas where leaks may be suspected.
Data Save - A Data Save feature allows you to save data during any investigation.
Simple Maintenance - Calibration and other maintenance are simple and can be performed in the field. A limited two year warranty covers the instrument.
Other features include and internal pump, displays LEL & ppm, infrared downloading, long life, low cost sensor and simple calibration.
Specifications
| Gases Detected |
Methane, Natural Gas, Ammonia, Hydrogen, Butane, Propane, Acetone, Gasoline, Halon, Jet Fuel, Refrigerants, Ethylene Oxide, Lacquer Thinners, Industrial Solvents |
| Probe Length |
16" flexible gooseneck, electrically insulated for safety |
| Sensor |
Solid state, to 10 ppm sensitivity |
Range
|
LEL: 0-100% LEL
ppm 0-50,000 ppm
|
| Resolution |
LEL: 0.1% |
| ppm: 1 or 10 ppm |
| Battery |
3 C cell batteries, life 30 hours of operation |
| Approvals |
Class I, Div I, Groups C&D, Hazardous Location T4 |
| Size |
3.0" x 11.5" x 2.2" |
| Weight |
1.2 pounds |
Ordering Information
Each unit includes the detector, wrist strap, case, manual, sensor cap with filters. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| HXG3 Combustible Leak Detector |
907-00000-01
|
| HXG3 with Calibration Kit |
907-00000-04
|
| HXG3 with internal pump |
907-00000-07
|
| 30" Non conductive Probe |
883-00002
|
| PC Interface with Software |
870-00008
|
| Infrared Printer |
870-00004
|
| Replacement Sensor |
375-2611-01
|
| Calibration Kit |
881-00015
|
| Sensor Cap |
365-00045
|
Downloads
HXG3 Combustile Gas Leak Detector literature
Note: The HXG3 cannot be used to check for carbon monoxide leakage from furnace heat exchangers due to the extremely low concentrations of carbon monoxide necessary to detect (less than 9 ppm/min). These low levels of carbon monoxide cannot reliably be detected by combustible gas detectors.