The 3M Multi Gas Detector 740 Series is designed for ease of use, durability, convenience and low operating cost. It's the ideal companion for workers on industrial sites or in confined work spaces - scenarios where potentially hazardous levels of CO, H2S, O2 or combustible gases may be found.
Apart from its power to detect up to four gases at a time, the 740 series detector features a bright, readable display, pre calibrated sensor replacement packs and heavy duty construction. Simply put: it's smart technology that you can count on to do its job, so you can focus on doing yours.
The 3M 740 detector offers a quality instrument with a low operating cost, which is good news for your employees and your business.
Features
Unsurpassed Convenience - The 3M 740 detector makes it easy to replace sensors with a unique Pre-Calibrated 3M Smart Sensor Pack. Why bother with individual sensors when you can replace all the sensors with one convenient insert in minutes?
Safety First - 3M has equipped the 740 detector with a 95 dBA alarm, dual red LED warning lights and a vibrate mode to get immediate attention in a busy work environment.
Maximum Endurance - The 3M 740 detector features remarkable staying power with long lasting lithium ion batteries. Now, you can rely on your detector to provide over 18 hours of run time. What's more, you can easily swap in three 3M recommended AAA alkaline batteries on the job if needed.
Great Features and Accessories - All 3M 740 detectors come with standard rechargeable Li-ion battery, charger adapter, visual, auditory, vibratory alarms, data logger, rugged alligator clip, infrared port, gas test hood and instruction manual
Built Tough - Tough jobs demand tough equipment. The 3M 740 detector is built with a rugged circuit board design and a heavy rubberized casing that helps deliver superior durability and protection against dropping, dust and liquids.
Easy Maintenance - Stay ready with simply the push of a button: over time or with heavy use, sensors in any gas detector need to be calibrated or replaced. The 3M 740 detector test mode helps ensure your unit is accurately measuring the target gas. The 3M 740 detector sensors are stingy when it comes to using calibration gas for testing. With a recommended flow rate of 0.2 LPM, the 3M 740 detector can help reduce your overall operating costs. 3M recommends the 740 detector be bump tested or sensor tested every day before use to help ensure accurate operation.
Long Memory - The 740 detector's long memory allows you to maintain more than 1000 hours (six months) of data on usage, exposure levels, and other important site conditions.
Specifications
Display
Large LCD with designated line for each sensor reading
1.2 MB (6 months of data at 1 minute intervals per 40 hours/week)
Operating Temperature
-4 to 122°F
Operating Humidity
15 to 90% Rh
Intrinsic Safety
Class 1, Div 1, Groups A, B, C, D, CSA approved
Size
4.8" L x 2.7" W x 1.4" H
Weight
10.4 ounces
Radio Frequency Protection
<10% deviation of alarm level when subjected to 450 mHz, 5 watt radio at 2 feet
Ingress Protection
Designed to meet IP 65
Datalogger
1.2 MB (6 months of data at 1 minute intervals per 40 hours/week)
Specifications - Sensors
Gas
Alarm Level
Range
Resolution
Oxygen
19.5%, 23%
0-25% Vol
0.1%
Carbon Monoxide
35 ppm
0-1,500 ppm
1 ppm
Hydrogen Sulfide
10 ppm
0-200 ppm
1 ppm
Combustible
10% LEL
0-100% LEL
1% LEL
Ordering Information
Prices start at $675.00 for a 4 gas Pilot. All Pilot multi gas detectors come equipped with rechargeable Li-Ion battery, charger adapter, internal vibrator, data logging, rugged alligator clip, infrared port, gas test hood and instructions. For pricing, please call 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email us at sales@afcintl.com.
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
