|
|
|
Home > Gas Detection > Fixed Point Gas Detection Systems > Hand Held System Programmer
SEC 2500 Hand Held Programmer
|
|
The SEC 2500 Hand Held Programmer transmits and receives infrared light from the front of the housing. The infrared light is used to establish non-intrusive communication with any SEC 2000 that is equipped with a display module. When communicating the SEC 2000, the SEC 2500 must be pointed directly at the display module of the SEC 2000 which can be up to 15 feet away.
The Programmer can communicate with any SEC 2000 gas detector on the same RS-485 network once infrared communication is established. Data exchange, using the infrared link, occurs at a rate of 300 baud.
|
The programmer has a socket at the bottom of the unit for connecting to a Data Communication Cable. The cable enables a hardwire communication connection to all SEC devices. Once communication is established, the devices can be checked, calibrated and information can be correlated with a touch of the keypad located on the SEC 2500 programmer. The SEC 2500 is certified for use in hazardous areas.
Specifications
| Data Communication Interfaces |
RS-485 wired connection, direct plug connection, infrared |
| Data Exchange Rate |
RS-485: 9600 baud |
| Direct: 300 baud |
| Infrared: 300 baud |
| Main Menu Choices |
Data exchange, configuration, relay programming, manual relay control, calibration, sensor synopsis, reset relays, lamp test, edit today's date |
| Controls |
Membrane keypad |
| Display |
16 x 2 line alpha numeric LCD display |
| Power Source |
4 AA batteries required |
| Battery Life |
About 25 hours |
Ranges for User Inputs
| Year |
0-2246 |
| Month |
1-12 |
| Day |
1-31 |
| ID Number |
0-9999 |
| Decimals |
0-2 |
| Calibration Gas Value |
1-9999 |
| Bridge Voltage (x10) |
0-255 |
| Low Alarm Set |
Combustible: 0-40 |
| All others: 0-9999 |
| Mid Alarm Set |
Combustible: 0-40 |
| All others: 0-9999 |
| High Alarm Set |
Combustible: 0-60 |
| All others: 0-9999 |
| Relay Off Delay |
0-255 minutes |
Ordering Information
For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
Downloads
|
|
|
Features
CSA/NRTL approved
Used for non-intrusive configuration and calibration of SEC 2000 gas detectors
Calibrates, checks and correlates data from any SEC detector on the data highway
Bidirectional infrared communication when pointed at any SEC 2000 display board
Intrinsically safe menu driven device
Can communicate with SEC 1500, SEC 2000 and SEC DAIM devices
|
