|
|
|
Home > Gas Detection > Portable Gas Detector > UltraRae 3000 Specific Compound Detector
NEW!! - UltraRae 3000 Specific Compound Monitor from Rae Systems
|
|
The UltraRae 3000 is the most advanced Compound Specific Monitor on the market. Its photoionization detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene specific mode makes it an ideal instrument for application from entry pre screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down stream monitoring.
- Dual detection mode for total benzene exposure assessment: 60 second snap shot or 15 minute STEL measurement
- High sensitivity to benzene (down to 50 ppb) providing a lower detection range for potentially lower future benzene exposure limits
- Lower risk of false alarms through advanced speciation method producing benzene readings you can trust
- Total VOC measurement mode with extended range of 0.05 to 10,000 ppm
Features
Superior Performance
- Proven PID technology
- 3 second response in VOC mode or 60 seconds in compound specific mode
- Extended range up to 10,000 ppm (in VOC mode) with improved linearity
- Humidity compensation with built in humidity sensor
- Automatic temperature controlled sampling time calculation
- Detectors benzene down to 50 ppb (0.05 ppm)
- Unique 15 minute benzene STEL calculation with 15 minute real time benzene specific measurement
- Highly specific readings, combining a 9.8 eV UV lamp and Rae-Sep benzene tube
- New sampling probe design provides instant tube breakthrough visibility
|
Extremely Versatile
- VOC mode or benzene specific mode for extreme versatility
- Real time wireless data transmission with built in BlueTooth and optional RAELink3 portable modem
- Integrated Rae Systems Correction Factors list for more than 200 compounds, measuring more compounds than any other PID
- Field interchangeable battery pack is replaceable in seconds without tools
- Large graphic display
- Multi language support
- Easy access to lamp and sensor in seconds without tools
- Inexpensive analysis using low cost Rae-Sep tubes versus gas detection tubes
- Much less expensive than a portable GC and no annual factory calibration required
Specifications
| Detector |
Photo ionization detector with standard 9.8 eV or optional 10.6 eV or 11.7 eV lamps |
| Battery |
Rechargeable, external field replaceable lithium ion battery pack and alkaline battery adapter |
| Operating Hours |
16 hours continuous operation |
| Display |
4 lines, 28 x 43 mm |
| Keypad |
1 operation key & 2 programing keys, 1 flashlight on/off button |
| Direct Readout |
VOCs as ppm by volume
High and low values
STEL and TWA
Battery and shutdown voltage
Date, time temperature |
| Alarm |
95 dB buzzer and flashing red LED to indicate exceeded preset limits
High: 3 beeps and flashes per second
Low: 2 beeps and flashes per second
STEL and TWA: 1 beep and flash per second
Alarms latching with manual override or automatic reset
Additional diagnostic alarm and display message for low battery and pump stall |
| EMI/RFI |
Highly resistant to EMI/RFI. Compliant with EMC directive (2004/108/EC); R&TTE directive (1999/5/EC) |
| IP Rating |
IP-65, unit running |
| Datalogging |
Standard 6 months at 1 minute intervals |
| Calibration |
2 point or 3 point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates |
| Communication |
Download data and upload instrument setup from PC through charging cradle
Wireless data transmission through built in BlueTooth |
| Frequency for RaeLink3 Optional Modem |
902 to 928 MHz (License free), 2.400 to 2.4835 GHz (License free), 433 MHz, 869 MHz |
| RF Range |
up to 15'/4.5M (2,400 GHz BlueTooth), extendable with RaeLink3 modem to 2 miles (3.2 km) |
| Low Flow Alarm |
Auto shut off pump at low flow condition |
| Sampling Pump |
Internal, integrated flow rate at 400 cc/min
Sample from 100' horizontally and vertically |
| Temperature |
-4 to 113°F |
| Humidity |
0 to 95% rH |
| Size |
10" L x 3" W x 2.5" H |
| Weight |
26 ounces |
| Approvals |
UL: Class I, Div I, Group A, B, C, D
ATEX: II 2G EEx ia IIC T4 |
Sensor Specifications
| Gas Monitor |
Range
|
Resolution
|
Response Time
|
| VOCs |
0 to 99.99 ppm
100 too 999.9 ppm
1,000 to 9,999 ppm
|
0.05 ppm
0.1 ppm
1 ppm
|
< 3 seconds
|
| Benzene |
0 to 200 ppm
|
0.05 ppm
|
< 60 seconds
|
| Butadiene |
0 to 200 ppm
|
0.05 ppm
|
< 60 seconds
|
Ordering Information
The UltraRae includes specified PID lamp and tubes, wireless communication module built in, datalogger, ProRae Studio Package, travel charger, Flex-I-Probe and short probe, external filter, red rubber boot, alkaline battery adapter, lamp cleaning kit, tool kit, Li-Ion battery and charger, operation CD-Rom, manual and soft leather case. The UltraRae Accessory Kit includes all of the above items plus a hard transport case, charging/download cradle, metal filters and o-rings, organic vapor zeroing kit, gas outlet port adapter and tubing. The Calibration Kit includes calibration gas and regulator. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| UltraRae Kit for Benzene includes Accessory Kit and Calibration Gas |
059-D311-200
|
| UltraRae Monitor Only for Benzene |
059-D310-000
|
| UltraRae Kit for Butadiene includes Accessory Kit |
059-D410-200
|
| UltraRae for Butadiene |
059-D410-000
|
Accessory Ordering Information
| Description |
Catalog No.
|
| Rae-Sep Benzene Tube, pk/5, requires 9.8 eV Lamp |
012-3022-005
|
| Rae-Sep Halocarbon Tubes, pk/5, requires 11.7 eV Lamp |
012-3023-005
|
| Rae-Sep Butadiene Tubes, pk/5, requires 9.8 eV Lamp |
012-3024-005
|
| Rae-Sep VOC Tubes, pk/5 |
012-2502-005
|
| Lamp Cleaning Kit |
081-0002-000
|
Downloads
|
|
|
Applications
Confined space entry pre screening during refinery and plant maintenance
Hazardous material response
Marine spill response
Refinery down stream monitoring
|
