|
|
|
Home > Gas Detection > Portable Gas Detectors > ToxiRae II Single Gas Monitor
ToxiRae II Single Gas Personal Gas Monitor from Rae Systems
|
|
The ToxiRae II single gas monitor continuously displays toxic gas concentrations and costs just a little more than disposable detectors. Unlike typical disposables that only display remaining life, the ToxiRae II is a full featured gas monitor providing continuous, digital display of the gas concentration, STEL, TWA and Peak values as well as high, low, TWA and STEL alarms.
A simple to use one button product, the ToxiRae II is easy to calibrate. Use the pre-set alarms or modify the alarms to meet your specific requirements. In contrast to disposables that are turned on once and remain on until their batteries expire, you decide when and where to use your ToxiRae II and you turn it on and off accordingly.
|
The ToxiRae II does not have a preprogrammed expiration date so you get the full life out of the battery and sensor. Sensors and battery are easily replaced in the field. And, because the cost of the ToxiRae II is about the same as many reduced feature disposables, you have the choice of renewing it or disposing of it and starting out with a fresh, new monitor.
Specifications
| Battery |
User replaceable 2/3AA high capacitance Lithium battery, extra battery included for use if maximum alrm minutes are exceeded |
| Operating Hours |
Typical battery life is 2 years or 730 minutes of alarm for CO, O2 and H2S sensors, one year typical or 360 minutes of alarm for all other sensors |
| Attachment |
Wrist strap, SS alligator clip (installed), SS belt clip/hard hat adapter |
| Display |
Easy to read LCD for continuous display of concentration in ppm and text messages |
| Key Pads |
1 button operation |
| Direct Readout |
Instantaneous values as parts per million in air |
| Peak hold |
| STEL & TWA values and alarm minutes consumed |
| Alarm |
Audible: 90 dB at 10 cm |
| Visual: Bright Red/Green LED bar visible form top, front and sides |
| Sensory: Built in vibration alarm |
| High: Displays "High" emits 3 beeps and flashes every 3 seconds |
| Low: Displays "Low" 2 beeps and flashes every 3 seconds |
| STEL: Displays "STEL" 1 beep and flash every 3 seconds |
| TWA: Displays "TWA" 1 beep and flash every 3 seconds |
| Low battery displays empty battery symbol, 1 beep per minute |
| Calibration |
Two point field calibration; Auto-zero at startup, user initiated span/standard reference gas |
| Temperature |
-40 to 131°F for O2, CO & H2S, for other sensors see Tech Note 114 |
| Humidity |
0 to 95% relative humidity (non-condensing) |
| Intrinsic Safety |
UL/cUL: Class I, Div 1, Groups A, B, C, D, T5 rating
ATEX: II 1G, EEx ia IIB T5 or II2G, EEx ia IIC T5
CE Mark
IECEx Ex ia IICT4 |
| EMI/RFI |
Highly resistant to EMI/RFI, compliant with EMC Directive 89/336/EEC |
| IP Rating |
IP-65; protected against dust, protected against low pressure jets of water from all directions |
| Size |
3.6" L x 1.9" W x 0.9" H |
| Weight |
3.6 ounces |
Sensor Specifications
| Sensor |
Range
|
Resolution
|
| Oxygen |
0-30%
|
0.1%
|
| Carbon Monoxide |
0-500 ppm
|
1 ppm
|
| Carbon Monoxide |
0-1,999 ppm
|
10 ppm
|
| Hydrogen Sulfide |
0-100 ppm
|
1 ppm
|
| Sulfur Dioxide |
0-20 ppm
|
0.1 ppm
|
| Nitric Oxide |
0-250 ppm
|
1 ppm
|
| Nitrogen Dioxide |
0-20 ppm
|
0.1 ppm
|
| Chlorine |
0-10 ppm
|
0.1 ppm
|
| Chlorine Dioxide |
0-1 ppm
|
0.01 ppm
|
| Hydrogen Cyanide |
0-100 ppm
|
1 ppm
|
| Ammonia |
0-50 ppm
|
1 ppm
|
| Phosphine |
0-5 ppm
|
0.01 ppm
|
Ordering Information
The ToxiRae II includes an operation & maintenance manual, stainless steel alligator clip, stainless steel belt clip/hardhat adapter, wrist strap, calibration adapter and high capacity Lithium battery. A rubber boot is also available. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| ToxiRae II, Ammonia |
045-0518-000
|
| ToxiRae II, Carbon Monoxide, 0-500 ppm |
045-0512-000
|
| ToxiRae II, Carbon Monoxide, 0-1,999 ppm |
045-0512-200
|
| ToxiRae II, Chlorine |
045-0516-000
|
| ToxiRae II, Chlorine Dioxide |
045-0523-000
|
| ToxiRae II, Hydrogen Cyanide |
045-0517-000
|
| ToxiRae II, Hydrogen Sulfide |
045-0511-000
|
| ToxiRae II, Nitric Oxide |
045-0514-000
|
| ToxiRae II, Nitrogen Dioxide |
045-0515-000
|
| ToxiRae II, Oxygen |
045-0006-000
|
| ToxiRae II, Phosphine |
045-0519-000
|
| ToxiRae II, Sulfur Dioxide |
045-0513-000
|
Downloads
|
|
|
Features
Large, easy to read continuous display of gas concentration in ppm
Displays STEL, TWA and Peak values and alarm minutes used
Sensors available include: H2S, CO, O2, NH3, Cl2, ClO2, HCN, NO, NO2, PH3 and SO2
Field replaceable battery
2 year warranty
You turn it on and off
User adjustable high, low, STEL and TWA alarms
Varying audio alarm signals for different alarm conditions
Bright red flashing alarm
Loud 90 dB buzzer
Built in vibration alarm
Holds Peak values
Simple calibration
Durable, highly impact resistant, carbon loaded ABS housing
Highly resistant RFI interference
Hands free use: clips onto a hardhat, shirt pocket, shoulder strap or belt
IP-65 rated weather resistant
Stainless steel corrosion resistant attachments
|
