NEW!! - SensorRae Sensor Conditioning
Station from Rae Systems
The SensorRae is a four socket electrochemical (EC) sensor conditioning station. It keeps Rae Systems' EC sensors warmed up and ready for immediate use when they are not installed in a Rae Systems EC product. Responders often require a complete suite of EC sensors (CO, H2S, SO2, NO, NO2, Cl2, HCN, PH3 and NH3), but may only use one or two sensors at a time in a particular detector. EC sensors must reach electrical stability to provide their best performance. While it takes just 10 minutes or a CO sensor to stabilize, it takes at least 6 hours for a NH3 sensor. However, when a particular chemical threat is identified, the appropriate sensor needs to be ready for use immediately upon installation in a detector.
When a specific EC sensor is required, remove it from the SensorRae and insert it into the Rae Systems detector. The standard alarm points an calibration values are automatically load into the detector. Reassemble the detector, turn it on and calibrate the sensor and it is ready for use. For the greatest safety and optimal performance, it is strongly recommended that a sensor be calibrated with its corresponding gas anytime it is moved from the SensorRae to a Rae Systems detector.
Features
Allows users with just one multi sensor detector to own a complete suite of Rae Systems electrochemical sensors
4 AAA batteries power the SensorRae for at least 12 months
Includes a battery test button and LED
Suitable for both low bias and high bias (NH3 & NO) sensors
Simple to use: just plug in the sensor
Compact case is small enough to fit in your pocket
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
