QRae gas detector,hydrogen sulfide,carbon monoxide,LEL,oxygen,nitric oxide,nitrogen dioxide,chlorine,hydrogen cyanide,ammonia,phosphine
Home > Gas Detection > Portable Gas Detector > QRae Plus Four Gas Detector

QRae Plus - 4 Gas Personal
Protection Monitor from Rae Systems

QRae Plus Gas Detector

The QRae Plus is a full featured, compact one to four sensor confined space gas detector. Available sensors include combustible gas, oxygen, hydrogen sulfide, carbon monoxide, sulfur dioxide, nitric oxide, nitrogen dioxide, chlorine, hydrogen cyanide, ammonia and phosphine. Key features include easy to change, externally accessed battery packs (available in both alkaline and rechargeable versions) and a water resistant case. The rechargeable Li-Ion battery pack provides up to 20 hours of continuous operation. The QRae Plus includes 16,000 datalogging points of storage capacity for download to PC compatible computers with Windows 95, 98, 2000 and NT.

Features

  • One to four plus in "smart sensors" including combustibles, oxygen, hydrogen sulfide and carbon monoxide
  • Optional sensors include sulfur dioxide, nitric oxide, nitrogen dioxide, chlorine, hydrogen cyanide, ammonia and phosphine
  • Rechargeable Lithium-Ion battery pack provides up to 20 hours of continuous operation
  • Rugged housing withstands use in harsh environments
  • Water and dust resistant case
  • Strong protective rubber boot
  • Highly resistant to radio frequency and other electromagnetic interference
  • Strong built in sample draw pump with optional collapsible sample probe
  • Available in diffusion configuration
  • One button calibration with auto zero capability
  • Loud audible alarm
  • Bright visual alarm
  • Interchangeable Li-Ion and alkaline battery packs

Applications

  • Confined Space Entry including waste water treatment plants, marine and off shore oil wells, landfill operations, trenches, silos, railcars, coal mines, cruise ships, sewers and manholes and tunnels
  • Refineries and petrochemical plants including offshore drilling and plant shut downs
  • Power plants
  • Pump and paper industry
  • Steel mills

Specifications

Detector Protected dual mode catalytic bead for combustible gases
Interchangeable electrochemical sensors for toxic gases (Oxygen not interchangeable)
Battery Interchangeable Li-Ion and alkaline battery packs, Rechargeable units include Li-Ion battery pack with internal smart charging, 120V AC/DC wall adapter and spare alkaline battery pack
Operating Hours Diffusion: Up to 20 hours continuous operation with Li-Ion battery, up to 18 hours with alkaline battery (typical without alarm)
Pump: Up to 16 hours continuous operation with Li-Ion battery, up to 12 hours with alkaline battery (typical without alarm)
Display 2 line, 16 digit LCD with LED back light automatically in dim light or alarm condition
Key Pads 1 operation key and 2 programming keys
Attachment Belt clip on rugged black rubber boot
Direct Readout Instantaneous values: Oxygen as % by vol, Combustible gas as % of lower explosion limit (LEL), Toxic gases as parts per million
High and low values for all gases
STEL & TWA values of toxic gases
Battery and shut down voltage
Date, time, elapsed time, temperature, LEL scale
Alarm 90 dB buzzer and flashing red LED to indicate exceeded preset limits: High - 3 beeps and flashes per second, Low - 2 beeps, vibrations and flashes per second, STEL & TWA - 1 beep, vibrations and flash per second
Alarms latching with manual override or automatic reset
Additional diagnostic alarm and display message for low battery and pump stall
Calibration Two point field calibration for zero and span, user selectable three point calibration for oxygen
Datalogging 16,000 points (67 hours at one minute intervals) with serial number of unit, user ID, site number, calibration date
IP Rating IP-55 protected against dust and low pressure jets of water from all directions
Sampling Pump Optional internal pump with user selectable flow rate: High - 250 cc/min, Low - 150 cc/min
Low Flow alarm Auto shut off pump at low flow condition
Temperature -4° to 113°F
Humidity 0 to 95% relative humidity (non-condensing)
Intrinsic Safety UL & cUL Class I, Division I, Group A, B, C, D, T3C
Size 4.5" L x 3" W x 1.8" H
Weight 16 ounces
Warranty Lifetime of non consuming components, 2 years for O2, LEL, CO & H2S sensors, 1 year for all other sensors, pump and battery

Sensor Specifications

Sensor
Range
Resolution
Response Time
Oxygen
0-30%
0.1%
15 seconds
Combustible Gas
0-100% LEL
1% LEL
15 seconds
Carbon Monoxide
0-500 ppm
1 ppm
20 seconds
Hydrogen Sulfide
0-100 ppm
1 ppm
30 seconds
Sulfur Dioxide
0-20 ppm
0.1 ppm
15 seconds
Nitric Oxide
0-250 ppm
1 ppm
20 seconds
Nitrogen Dioxide
0-20 ppm
0.1 ppm
25 seconds
Chlorine
0-10 ppm
0.1 ppm
60 seconds
Hydrogen Cyanide
0-100 ppm
1 ppm
60 seconds
Ammonia
0-50 ppm
1 ppm
150 seconds
Phosphine
0-5 ppm
0.1 ppm
60 seconds

The SensorRae is available for the QRae Plus. The SensorRae is a four socket electrochemical sensor conditioning station. It keeps Rae Systems' sensors warmed up and ready for immediate use when they are not installed in a Rae Systems EC product.

Ordering Information

Each QRae Plus includes datalogger, rechargeable Lithium Ion battery, 120 V AC/DC wall adapter, alkaline battery adapter, calibration adapter, rubber boot with belt clip, training CD-Rom, manual, software and cable, pumped models include water trap filters, inlet probe and water trap adapter. The accessory kit includes a hard transport case with precut foam, Tygon tubing, tool kit, constant flow hand pump (for diffusion models). The Calibration Kit includes a 4 gas, 34L calibration gas cylinder and regulator. Other sensor configurations available. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description
Catalog No.
QRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensor with Datalogger
028-1112-010
QRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensor with Datalogger and Accessory Kit
028-1112-011
QRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensor with Datalogger, Accessory Kit and Calibration Kit
028-1112-012
New Products | Air Sampling | Gas Detection | Other Meters | Respiratory | Water Quality | WMD HazMat
Applications | Product Specials | Rentals | Links | Index | Contact Us | Home


AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826
eMail: sales@afcintl.com

Last Revised: 10/6/07