.
WMD Banner
Industries Served

• Industrial
• Fire
• Industrial Hygiene
• Law Enforcement
• Hazmat
• WMD
• Waste Water Treatment
• Refineries
AFC Logo
Home > Gas Detection > Wireless > ProRae Monitor

ProRae Monitor Software for AreaRae from Rae Systems

RaeLink2 Modem

ProRae Remote Monitor Display is the PC based software that provides a simple Windows user interface that displays the outputs of remote sensors into user friendly displays. It also facilitates real time, wireless broadcast communication from an AreaRae base controller.
  • Continuously displays sensor data broad case from the host controller
  • Shows alarm status when necessary
  • With GPS option, display location of individual remote monitors on a geographic map

The RF modem allows real time data reception with a base controller located up to two miles away from the Remote Monitor Display unit. A personal computer can be used as the Remote Monitor Display unit. The standard ProRae Remote software used to control AreaRae systems is capable of monitoring the input of up to 16 remotely located monitors.

The Remote Monitor Display unit is a passive listen only device. It will display all ProRae Remote system information but has no control functions.

Panel View is the main window that emulates a traditional hard wired panel display providing display ID and normal (green) or alarm status (flashing red) of each monitor in the system in real time.

Alarms: panel view will provide audible alarms using a simulated voice along with visual alarms.

Image view allows users to place the remote unit on an imported map (bmp, jpg, gif). This is perfect for indoor applications when GPS will not work. Status windows can be shown on this view just like panel view.

Log view can show the history of each remote unit on the AreaRae system as either text or graphic data.

Specifications - Minimum Hardware Requirements

CPU Pentium class 330 MHz
Display SVGA (800 x 600 resolution, 16 bit color)
Hard Drive 30 MB available hard disk space
Optical Drive CD-ROM drive
Serial Port RS-232 Com port for communication to RaeLink modem
Sound Card Required for voice alarm notification

Specifications - Minimum Software Requirements

Operating System Windows 98 2nd edition, Windows NT SP4 or higher, Windows 2000 or Windows XP
Browser Microsoft Internet Explorer 4.01 or higher to view the ProRae Remote online help

RaeLink Specifications

Frequency 902-928 MHz (License free ISM band)
Spreading Method Frequency hopping
Hopping Pattern 15
Hopping Channel 50-112
Range 2 miles
Output Power 400 mW (+25 dBm) at 7.5V to 9.5V
Modulation GFSK, 120kBs-170kBs
Occupied Bandwidth 230 kHz
Receiver Sensitivity -108 dBm at 10-6 raw bit error rate
Receiver Selectivity 40 dB at fc, 230 kHz; 60 dB at fc, 380 kHz
Error Detection 32 bit CRC, resend on error
Link Throughput 115 kbps
Interface RS-232, 19.2 kbps
Data Encryption Substitution, dynamic key
Operating Mode Point to multipoint

Ordering Information

For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.

ProRae Remote Monitor turn key display system pacage includes: Notebook PC preloaded with ProRae Remote software that is fully configured, tested and ready to go, ProRae Remote software CD, quick reference guide, manual, RS-232 cable, RaeLink Remote unit modem with built in rechargeable Litium-Ion battery, 120/240 VAC AC/DC adapter, ICD-USG AC line cord, 5 db antenna with magnetic mount and 12' of cable and hard transport case.

ProRae Remote Monitor display basic package includes ProRae Remote software CD, quick reference guide, manual, RS-232 cable, RaeLink Remot unit modem with built in rechargeable litium-ion battery, 120/240 VAC AC/DC adapter, IEC-USG AC line cord, 5db antenna with magnetic mount and 12 feet of cable and hard transport case.

Downloads
Last Revised: 1/31/09