MultiRae IR - CO2 One to Five
Gas Monitor With VOC Detection
from Rae Systems
The MultiRae IR combines a PID and Carbon Dioxide sensor with O2, LEL and 1 specific toxic gas sensor in one compact monitor with sampling pump. The MultiRae IR's versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRae IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand held sniffer or as a continuous, operational area monitor for use in applications including indoor air quality and industrial hygiene.
Features
O2, LEL, PID, CO2 and any plug in "smart" toxic sensors: CO, H2S, SO2, NO, NO2, Cl2, HCN, NH3, PH3
0-20,000 ppm measurement of CO2 using Rae's patented non-dispersive infrared (NDIR) sensor.
0-2,000 ppm measurement of VOCs with 0.1 ppm resolution
Measure more chemiacls than with any other PID: with over 60 correction factors built into the MultiRae IR memory and the largest printed list of correction factors in the world (300+), Rae Systems offers the ability to accurately measure more ionizable chemicals than any other PID!
Drop in battery for when work schedules require putting in more hours than the 12 hours supplied by the advanced Lithium-Ion battery, the drop in alkaline pack supplied with every MultiRae IR allows you to finish the job.
User friendly screens make it easy to use the simple applications and flexible enough for sophisticated options.
Rugged rubber boot helps assure that the MultiRae IR survives the bumps and knocks of tough field use.
Strong built in sample pump draws up to 100; horizontally or vertically. Liquid trap and automatic low flow alarm protect the MultiRae IR from damage.
Large keyts operable with 3 layers of gloves.
Easy to read display with backlight
Store up to 80 hours of data at one minute intervals for all 5 sensors for download to PC with the optional datalogging.
Loud audible alarm that varies for different alarm conditions and an optional external vibration alarm for nosiy areas.
Applications
Indoor air quality
Beverage and brewery
Food industry
Hospitals
Respirable breathing air testing
Instrument Specifications
Detector
Non Dispersive infrared sensor for CO2
Protected catalytic bead for combustible gases
Interchangeable electrochemical sensors for oxygen and toxic gases
Photo ionization detector for VOCs, 10.6 eV lamp standard
Battery
Interchangeable Li-Ion and alkaline battery packs. Rechargeable units include Li-Ion battery pack with internal smart charging. 120V AC/DC wall adapter and spare alkaline battery pack.
Operating Hours
12 hours continuous, unit will run and charge simultaneously
Display
2 line, 16 digit LCD with LED back light automatically in dim light or alarm condition
Key Pads
1 operation key and 2 programming keys
Attachment
Wrist strap and carry case with belt loop and shoulder strap
Direct Readout
Instantaneous values: Oxygen as % by vol, Combustible gas as % of lower explosion limit (LEL), Toxic gases, CO2 and VOCs as parts per million by volume
High and low values for all gases
STEL & TWA values of toxic gases, VOCs and CO2
Battery and shut down voltage
Date, time, elapsed time, temperature, LEL/VOC scale (using correction factors)
Alarm
90 dB buzzer and flashing red LED to indicate exceeded preset limits: High - 3 beeps and flashes per second, Low - 2 beeps and flashes per second, STEL & TWA - 1 beep and flash per second
Alarms automatic reset or latching with manual override
Additional diagnostic alarm and display message for low battery and pump stall
Calibration
Two point field calibration for zero and span gas
Datalogging
20,000 points (80 hours, 5 channels at one minute intervals) down load to PC with serial number of unit, user ID, site number, calibration date
Sampling Pump
Internal pump with user selectable flow rate: Low: 150 cc/min, High: 250 cc/min
Temperature
-4° to 113°F
Humidity
0 to 95% relative humidity (non-condensing)
Size
4.65" L x 3" W x 1.9" H
Weight
16 ounces
Warranty
Lifetime on non-consuming components, 2 year for CO2, O2, LEL, CO, H2S sensors, 1 year all other sensors, 1 year pump, 1 year battery, 1 year for 10.6 eV PID lamp
Sensor Specifications
Sensor
Range
Resolution
Response Time
Carbon Dioxide
0-20,000 ppm
10 ppm
60 seconds
Oxygen
0-30%
0.1%
15 seconds
Combustible Gas
0-100% LEL
1%
15 seconds
VOCs
0-200 ppm
0.1 ppm
10 seconds
200-2,000 ppm
1 ppm
10 seconds
Carbon Monoxide
0-500 ppm
1 ppm
20 seconds
Hydrogen Sulfide
0-100 ppm
1 ppm
30 seconds
Sulfur Dioxide
0-20 ppm
0.1 ppm
15 seconds
Nitric Oxide
0-250 ppm
1 ppm
20 seconds
Nitrogen Dioxide
0-20 ppm
0.1 ppm
25 seconds
Chlorine
0-10 ppm
0.1 ppm
60 seconds
Hydrogen Cyanide
0-100 ppm
1 ppm
60 seconds
Ammonia
0-50 ppm
1 ppm
150 seconds
Phosphine
0-5 ppm
0.1 ppm
60 seconds
The SensorRae is available for the MultiRae Plus. The SensorRae is a four socket electrochemical sensor conditioning station. It keeps Rae Systems' sensors warmed up and ready for immediate use when they are not installed in a Rae Systems EC product.
Ordering Information
Each instrument includes specified sensors, filters, calibration adapter, manual, rubber boot, alkaline battery adapter, inlet probe, Li-ion battery & charger, datalogger, software and cable. The Accessory Kit includes a hard transport case, Teflon tubing, and tool kit. The Calibration Kit includes calibration gas and regulators. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
Description
Catalog No.
MultiRae Plus with LEL, Oxygen, & Carbon Dioxide and Pump
037-30C0-000
MultiRae Plus with LEL, Oxygen, & Carbon Dioxide, Pump and Accessory Kit
037-30C0-001
MultiRae Plus with LEL, Oxygen, Carbon Dioxide & 10.6 eV PID and Pump
037-30C1-000
MultiRae Plus with LEL, Oxygen, Carbon Dioxide & 10.6 eV PID, Pump and Accessory Kit
037-30C1-003
MultiRae Plus with LEL, Oxygen, Carbon Monoxide, Carbon Dioxide & 10.6 eV PID and Pump
037-32C1-000
MultiRae Plus with LEL, Oxygen, Carbon Monoxide, Carbon Dioxide & 10.6 eV PID, Pump and Accessory Kit
037-32C1-003
Other sensor combinations available, please contact AFC for details.
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com