Home > Gas Detection > Portable Gas Detector > MultiRae Plus Gas Monitor with VOC Detection

MultiRae Plus - One to Five
Gas Monitor With VOC Detection
from Rae Systems

The MultiRae Plus combines a PID (Photo Ionization Detector) with the standard four gases of a confined space monitor (O2, LEL and two toxic gas sensors) in one compact monitor with sampling pump. The MultiRae Plus gets the job done in more circumstances than any other gas detector. With more than 10,000 units in the field today, its versatility makes it the gas meter of choice for some of the highest profile HazMat/WMD teams in the USA. The MultiRae Plus is quickly and easily changed from a sophisticated technician instrument to a simple text only monitor. The same monitor can be used as a personal monitor, a hand held sniffer or as a continuous operation area monitor.

Features

O2, LEL PID and any two plug in "smart" toxic sensors: CO H2S, SO2, NO, NO2, Cl2, HCN, NH3, PH3
0-2,000 ppm measurement of VOCs with 0.1 ppm resolution
Measure more chemicals than with any other PID. With over 60 correction factors built into the MultiRae Plus memory and the largest printed list of correction factors in the world (300+), Rae Systems offers the ability to accurately measure more ionizable chemicals than any other PID!
Drop in battery - when work schedules require putting in more than 14 hours suppled by the advanced Lithium-ion battery, the drop in alkaline pack supplied with every MultiRae Plus allows you to finish the job.
User friendly screens make it easy to use for simple applications and flexible enough for sophisticated options.
Rugged rubber boot assures that the MultiRae Plus survives the bumps and knocks of tough field use.
Strong, built-in sample pump draws up to 100 feet horizontally or vertically. Large external filter and automatic low flowage.
Large keys are operable with 3 layers of gloves
Easy to read display with backlit
Store up to 80 hours of data at one minute intervals for all 5 sensors for download to PC (with the optional datalogging)
Loud audible alarm that varies for different alarm conditions and an optional external vibration alarm for noisy areas.
Access sensors and battery in seconds with the new, improved case.

Applications

Initial PPE (personal protective equipment) assessment

Leak detection

Perimeter establishment and maintenance

Spill delineation

Decontamination

Remediation

Homeland Security

Confined Space Entry

IAQ

Aviation/wing tank entry with jet fuel

Shipyard and maritime confined spaces with diesel fuel

Leaking underground storage tanks

Pulp and paper industry for confined space entry in turpentine environments

Soil and water headspace analysis

Landfill monitoring

Instrument Specifications

Detector	Protected catalytic bead for combustible gases
	Interchangeable electrochemical sensors for oxygen and toxic gases
	Photo ionization detector for VOCs, 10.6 eV lamp standard
Battery	Interchangeable Li-ion and alkaline battery packs, rechargeable units include Li-ion battery pack with internal smart charging, 120V AC/DC wall adapter and spare alkaline battery pack
Operating Hours	14 hours continuous, unit will run and charge simultaneously
Display	2 line, 16 digit LCD with LED back light automatically in dim light or alarm condition
Key Pads	1 operation key and 2 programming keys
Attachment	Durable yellow boot with belt clip and wrist strap
Direct Readout	Instantaneous values: Oxygen as % by vol, Combustible gas as % of lower explosion limit (LEL), Toxic gases and VOCs as parts per million by volume
	High and low values for all gases
	STEL & TWA values of toxic gases and VOCs
	Battery and shut down voltage
	Date, time, elapsed time, temperature, LEL/VOC scale
Alarms	90 dB buzzer and flashing red LED to indicate exceeded preset limits: High - 3 beeps and flashes per second, Low - 2 beeps and flashes per second, STEL & TWA - 1 beep and flash per second
	Automatic reset or latching with manual override
	Additional diagnostic alarm and display message for low battery and pump stall
Calibration	Two point field calibration for zero and standard reference gas
Datalogging	80 hours, 5 channels at one minute intervals download to PC with serial number of unit, user ID, site number and calibration gas
EM/RFI	Highly resistant to EMI/RFI, compliant with EMC Directive 89/336/EEC
IP Rating	IP-55 protected against dust, protected against low pressure jets of water from all directions.
Sampling Pump	Internal pump, Low: flow rate 150 cc/min, High: 250 cc/min
Low Flow Alarm	Auto shut off pump at low flow condition
Temperature	-4° to 113°F
Humidity	0 to 95% relative humidity (non-condensing)
Intrinsic Safety	UL & cUL Class I, Division I, Group A, B, C, D, T3C, EEX ia IIC T3, T4
Size	4.65" L x 3" W x 1.9" H
Weight	16 ounces

Sensor Specifications

Sensor	Range	Resolution	Response Time
Oxygen	0-30%	0.1%	15 seconds
Combustible Gas	0-100% LEL	1%	15 seconds
VOCs	0-200 ppm	0.1 ppm	10 seconds
VOCs	200-2,000 ppm	1 ppm	10 seconds
Carbon Monoxide	0-500 ppm	1 ppm	20 seconds
Hydrogen Sulfide	0-100 ppm	1 ppm	30 seconds
Sulfur Dioxide	0-20 ppm	0.1 ppm	15 seconds
Nitric Oxide	0-250 ppm	1 ppm	20 seconds
Nitrogen Dioxide	0-20 ppm	0.1 ppm	25 seconds
Chlorine	0-10 ppm	0.1 ppm	60 seconds
Hydrogen Cyanide	0-100 ppm	1 ppm	60 seconds
Ammonia	0-50 ppm	1 ppm	150 seconds
Phosphine	0-5 ppm	0.1 ppm	60 seconds

The SensorRae is available for the MultiRae Plus. The SensorRae is a four socket electrochemical sensor conditioning station. It keeps Rae Systems' sensors warmed up and ready for immediate use when they are not installed in a Rae Systems EC product.

Ordering Information

Each instrument includes specified sensors, filters, calibration adapter, training CD-Rom, manual, rubber boot, alkaline battery adapter, Li-ion battery & charger, datalogger, software, cable and inlet probe. The Accessory Kit includes a hard transport case, sampling wand with 15' of self coiling Teflon tubing and tool kit. The Calibration Kit includes calibration gas and regulators. Each MultiRae Plus is wireless enabled and certified. A black rubber boot is available for tactical operations. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com

Description	Catalog No.
MultiRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensors, 10.6 eV PID Lamp, Pump and Datalogger	009-3121-010
MultiRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensors, 10.6 eV PID Lamp, Pump, Datalogger and Accessory Kit	009-3121-013
MultiRae Plus with LEL, Oxygen, Carbon Monoxide & Hydrogen Sulfide Sensors, 10.6 eV PID Lamp, Pump, Datalogger, Accessory Kit and Calibration Kit	009-3121-014
Black Rubber Boot	027-3042-000