The HXG3 is an advanced state of the art combustible gas leak detector capable of sensing many combustible gases such as methane, propane and natural gas. The backlit LCD display shows percent lower explosive limit (LEL) and part per million (ppm readings simultaneously for accurate leak detector and analysis. Audible and visual alarms warn of potential hazardous conditions.
Leaks Easily Pinpointed - Leaks can easily be pinpointed by using an audible tick rate. The sensor is located at the end of a flexible gooseneck to easily reach areas where leaks may be suspected.
Datalogging - A datalogging feature allows you to save data during any investigation as well as the last calibration date for download to the optional printer or PC interface. All downloading is accomplished through the infrared LED.
Simple Maintenance - Calibration and other maintenance are simple and can be performed in the field. A limited two year warranty covers the instrument.
The HXG3 is also available with an optional internal pump.
16" flexible gooseneck, electrically insulated for safety
Sensor
Solid state, to 10 ppm sensitivity
Alarm Set Rate
2.5% methane, 50% LEL
Resolution
0.1%
10 ppm
Battery
3 C cell batteries, life 30 hours of operation
Approvals
Class I, Div I, Groups C&D, Hazardous Location T4
Size
3.0" x 11.5" x 2.32"
Weight
1.2 pounds
Ordering Information
Each unit includes the detector, wrist strap, case, manual, sensor cap with filters. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
Note: The HXG3 cannot be used to check for carbon monoxide leakage from furnace heat exchangers due to the extremely low concentrations of carbon monoxide necessary to detect (less than 9 ppm/min). These low levels of carbon monoxide cannot reliably be detected by combustible gas detectors.
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
