|
|
|
Home > Gas Detection > Portable Gas Detector > HXG2 Combustible Gas Leak Detector
HXG2 CombustibleGas Leak Detector
|
|
The HXG2 is small and lightweight, making it a truly portable leak detection device for all types of service work. High instrument sensitivity will pinpoint even the smallest leaks quickly. Calibrated alarm indicates the presence of most types of combustible and toxic gases. This one instrument can help:
- Heating, air conditioning and plumbing contractors quickly find leaks
- Fire and police department with safety and arson investigations
- Municipalities check manholes and confined spaces
- Industry check for hazardous conditions
- Home owners make minor repairs
- Perform highly reliable furnace heat exchanger testing
|
Specifications
| Gases Detected |
Methane, Natural Gas, Ammonia, Hydrogen, Butane, Propane, Acetone, Gasoline, Carbon Monoxide, Refrigerants, Ethylene Oxide, Halo, Hydrogen Sulfide, Lacquer Thinners, Industrial Solvents, Alcohol and Jet Fuel |
| Probe Length |
16" flexible gooseneck, electrically insulated for safety |
| Alarms |
Red flashing warning light, green ready light |
| Alarm Set Rate |
Factory set at 0.5% methane (10% LEL), adjustment 0 to 2% (40% LEL), easily calibrated for other gases |
| Audible Alarms |
Adjustable tick rate |
| Quiet alarm button for searching for leaks during alarm condition |
| Battery |
3 C cell batteries |
| Approvals |
Class I, Div I, Groups C&D, Hazardous Location T4 |
| Size |
3.5" x 10" x 1.6" |
| Weight |
1.3 pounds |
Each unit includes the detector with hard carrying case and batteries. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| HXG2 Combustible Leak Detector |
HXG2
|
| Replacement Sensor |
A716
|
| Sensor Cap |
A717
|
| Soft Carrying Pouch |
A700
|
| Hard Carrying Case |
A718
|
| Earplug |
A710
|
| Calibration Gas, 21L |
A715
|
| Calibration Kit |
A720
|
| Replacement Wrist Strap |
A719
|
Note: The HXG2 cannot be used to check for carbon monoxide leakage from furnace heat exchangers due to the extremely low concentrations of carbon monoxide necessary to detect (less than 9 ppm/min). These low levels of carbon monoxide cannot reliably be detected by combustible gas detectors.
|
|
|
Features & Benefits
Solid state sensor - highly reliable
Ultra sensitive - as little as 10 ppm methane
Wide range nullable tick detection
Adjustable alarm level
Calibrated to NIST Traceaable Standards
|
