|
|
|
Home > Gas Detection > Portable Gas Detectors > FTIR Analyzer
Environics ID 100 Portable FTIR Analyzer
|
|
The ID 100 is the first truly portable FTIR gas analyzer in the world. The lightweight analyzer module is located in a durable Teflon coated backpack. The ID100 analyzer houses a Fourier Transform Infrared (FTIR) spectrometer, Rhodium-
|
Gold coated sample cell and signal processing electronics. The sample gas is extracted into the sample cell with apistol type probe. Hence no sample preparation is needed. The ID100 is designed for on site measurements of different compounds (both organic and inorganic) at low concentrations in ambient air. Typical usage areas include industrial hygiene and emergency response situations. Analaysis results are displayed on screen of a miltary grade PDA.
Optionally, the analyzer can be connected with a laptop PC for extended analysis capability (e.g. identification of unknown compounds with library spectra).
There are no consumable parts that would need replacing on a regulaor basis. In addition, due to FTIR technology, the calibrations remain very stable. Hence no span calibrations are needed. Also, cross interferences (i.e. interference from other gases) are automatically compensated in the analysis algorithm during the calculation of the results.
The ID100 is ideal to be used with the ChemPro 100 Detector. This enables rapid detection and accurate analysis of the detected threat.
Instrument Specifications
| Detectors |
Orthogonal detection using: open loop (aspirated)IMS cell, temperature, humidity, 2 semiconductor sensors
|
| Detection Libraries |
Chemical Warfare Agents (CWAs), First Responder, Toxic Industrial Chemicals (TIC) optional, CWA Precursors optional, Volatile Organic Compounds optional
|
| Battery |
Easily interchangeable Li-Ion rechargeable and alkaline packs included
|
| Operating Hours |
1 hours continuous life, 6 hours continuous use on common alkaline but Li-Ion batteries such as Energizer L91 will provide 14 hours of continuous use, unit will run and charge simultaneously
|
| Battery Recharge Time |
5 hours using the standard charger of vehicle charger
|
| Display |
Graphical LCD display with 128 x 64 pixels and blue backlight
|
| Keypad |
3 operation and programming keys
|
| Sampling |
1 LPM internal pump
|
| Calibration |
No calibration required, but a simple confidence check is recommended before use
|
| Alarm Modes |
Audible (adjustable up to 95 db) and visual alarms
|
| External Alarm |
Optional earphone alarm available
|
| Datalogging |
Datalogging is standard, datalog settings can be adjusted from the CP100 user Interface Program needed for downloading the data to a PC
|
| Temperature, Operating |
-22°F to 131°F, up to 175°F temporarily
|
| Temperature, Storage |
-40°F to 160°F
|
| Humidly |
0-95% non condensing |
| Dust & Water Resistance |
IP67: Dust tight (resists blowing sand MIL-STD-810F) and protected against water immersion when inlet is closed |
| Shock & Vibration Resistance |
High impact composite case passes vibration and drop tests (MIL-STD-810E) |
| EMI/RFI Interference |
Highly resistant to electromagnetic and radio interference and does not generate electromagnetic interference (MIL-STD-461E) |
| Use in Potentially Flammable Environments |
Will not ignite a n-Hexane atmosphere (MIL-STD-810F) |
| Mean Time Between Failure |
>3000 hours, expendables limited to a simple replaceable filter |
| Size |
9" x 4" x 2" |
| Weight |
1.8 pounds |
Ordering Information
Each ChemPro 100 is a complete solution for the detection of nerve, blister and blood agents as well as a number of toxic industrial chemicals. Each unit includes the monitor with Li-ion battery installed, carrying bag, charger, Pelican style case, test tube for confidence check, filter, manual, quick start guide, alkaline battery adapter For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com,
|
|
Features
Truly handheld CWA & TIC detection
Strongest TIC protection in it class
Fast start up time, 1 - 3 minutes
Up to 27 times less expensive to own than comparable CWA/TIC detectors
Lowest logistical requirement of any CWA/TIC detector
Predictable maintenance requirements
Designed to rugged military standards:
- 22 to 131°F & up to 175°F temporarily
- High impact composite case passes vibration & drop test (MIL-STD-810E)
- Resists blowing sand and will not ignite a n-Hexane atmosphere (MIL-STD-810F)
- Resists electromagnetic interference and does not generate electromagnetic interference (MIL-STD-461E)
Waterproof (IP67) when inlet is closed
|
|
