|
|
|
Home > Gas Detection > Portable Gas Detectors > X-am Multi Gas Detector
X-am 2000 Multi Gas Detector with Datalogger from Draeger Safety Inc.
|
|
Draeger X-am 2000 is one of a new generation of gas detectors which have been specially designed for personal monitoring use. The 1 to 4 gas detector reliably measures combustible gases and vapors, as well as oxygen, carbon monoxide and hydrogen sulfide. Its ergonomic design, mobile phone dimensions and low weight make it the perfect companion in your daily work. Reliable measurement technology, long sensor life and easy operation guarantee maximum safety at extremely low cost of ownership.
|
- Ergonomic and Mobile Phone Sizing - Light weight and mobile phone size guarantee users a high level of comfort and convenience. By design, the instrument can be used intuitively thanks to the practical two key control panel and straight forward menu guidance system.
- Vapor Sensitive Ex Measurement - For improved safety when facing unknown hazards: the catalytic Ex sensor, calibrated to methane, not only responds quickly to explosive gases, but offers a high level of sensitivity to combustible organic vapors, thus providing dependable warnings in the event of explosive hazards.
- Long Life Electrochemical Sensors - DragerSensors stand for innovative technology at the highest level. The Draeger X-am 2000 features the latest series of powerful electrochemical DraegerSensors from the miniaturized XXS generation, which are warranted for a period of three years.
- Robust and Water Tight - The Draeger X-am 2000 is tough: water and dust resistant to IP67, the instrument remains fully functional and ready for use even after being dropped in water. The integrated rubber protection and shock proof sensors ensure additional resistance to impact and vibration. Futhermore, the Draeger X-am 2000 is able to withstand electromagnetic interference.
- Gas Inlets On Two Surfaces - Twice as reliable: the functional design ensures that gas can enter the instrument from the top and the front, so even if it's accidentally put in a pocket, it will still provide reliable warnings against gas hazards.
- A Range of Alarm Functions - In alarm situations, the Draeger X-am 2000 provides three different types of warning:
- Loud, audible multi tone alarm
- Visual 180 degree alarm
- Built in vibration alarm
- Flexible Power Supply - The Draeger X-am 2000 can be used with either the standard alkaline or optional NiMH batteries. In addition, it can be configured with a T4 battery, which can be recharged while still inside the instrument. Charging can take place in the workshop or in a vehicle, to suit your needs.
- Intelligent Data Management - Everything's under control: the Draeger X-am 2000 is equipped as standard with an data logger. The data can be transmitted via infrared interface to a PC and analyzed using the Draeger GasVision software.
- Optimum Solutions for Function Tests and Adjustments - Simple, fast and professional: from a function test to complete documentation, users have a range of practical solutions to choose from for total peace of mind. The Draeger E-Cal automatic test and calibration station and the Draeger Bump Test Station are ideal complements to the instrument, saving time and minimizing your workload.
- User Registration in Seconds - An absolute must to ensure the right person gets the right instrument: the optional registration set, when used in conjunction with the Draeger CCVision software, allows individualized issue of instruments and a quick check of completeness upon their return.
Instrument Specifications
| Battery |
NiMH: >12 hours
Alkaline: >12 hours |
| Alarms |
Visual: 180°
Audible: Multi tone >90 dB at 30 cm
Vibration |
| Temperature |
-4 to 122°F |
| Pressure |
700 to 1300 mbar, 20.7 to 38.4" Hg |
| Humidity |
10 to 95% Rh |
| IP Protection |
IP 67 |
| Charging Time |
< 4 hours |
| Data Logger |
Can be read out via IR > 1000 hours with 4 sensors and a recording interval of 1 reading per minute |
| Size |
1.85" x 5.08" x 1.22" |
| Weight |
7.8 ounces |
| Approvals |
UL: Class 1, Div 1, Groups A, B, C & D, Class II, E, F, G, Temp Code T4/T3
ATEX: II 2G EEx ia d IIC T4/T3; I M2 EEx ia d I
CSA: Class I, Div 1, Groups A, B, C & D, Class II, E, F, G, Temp Code T4/T3
IECEx: Ex ia d I/IIC T4/T3
CE Mark: Electromagnetic compatibility
MSHA |
| Warranty |
3 years on monitor and sensors, 2 years on optional T4 NiMH battery pack |
| Gas |
Range
|
Response Time T50 (Sec)
|
| Combustible |
0-100% LEL
|
8
|
| Carbon Monoxide |
0-2,000 ppm
|
6
|
| Hydrogen Sulfide |
0-200 ppm
|
6
|
| Oxygen |
0-25 Vol %
|
6
|
Ordering Information
Prices start at $699.00. Other configuration available. Now available is a remote sample pump for the X-am 2000. The pump can be used remotely up to 66 feet. MSHA approvals now available. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| X-am 2000 for Ex/O2/CO/H2S Gas Monitor with Datalogger |
8318910
|
| Remote Sample Pump |
8319400
|
| Remote Sample Pump Kit with case, tygon tubing, float probe and filter |
4543760
|
Accessory Ordering Information
| Description |
Catalog No.
|
| NiMHy Battery Kit includes battery, charge cradle & power supply |
8318785
|
| GasVision Software for data download & management |
8314034
|
| CC-Vision software for calibration & configuration |
6408515
|
| PC Communication Set 1 includes CC-Vision, USB Cable, and Registration Software |
8318761
|
| PC Communication Set 2 includes CC-Vision, USB Cable, registration software and Barcode Scanner |
8317409
|
| Bump Test Station, order gas |
8319131
|
| E-Cal Module |
8318754
|
| Telescopic Probe, 4.5' |
4510546
|
| Telescopic Probe, 6.5' |
4510545
|
| Nylon Transport Case |
4594631
|
Downloads
|
|
|
|
