|
|
|
Home > Gas Detection > Portable Gas Detector > Gasman Single Gas Detector
Gasman Single Gas Detector from Crowcon Detection
|
|
Designed to meet the need for personal monitoring in tough industrial environments, Gasman is small, light and simple to use providing comprehensive warning of hazardous gas conditions. Featuring interchangeable i-module intelligent sensors and simple single button operation Gasman is the most flexible and easy to use product available today. Rugged in design meeting both IP65 and IP67 standards for ingress protection, Gasman sets a new standard for personal gas monitors. |
Simple
- True one button operation
- Easy to read LCD display with backlight
- Clear indication of operating status
- 30 days advance calibration due warning
Assurance
- 95dBA audible alarm
- Striking twin red/blue visual alarm
- Internal vibrating alarm
- 2 levels of instantaneous alarm
- Time weighted average alarms for toxic versions
Robust
- Tough polycarbonate housing
- Full elastomeric overmolding
- High impact resistance
- IP65 and IP67 compliant
Flexible
- Fully interchangeable i-module sensors
- Flammable toxic and oxygen sensors available
- Rechargeable version for all gas types
- Dry cell versions for toxics and oxygen
- Data and event logging
Specifications
| Range |
Dependent on gas, see chart below |
| Audible Alarms |
95 dBA, multiple alarm sounds allow selection of distinctive tones for different alarm levels |
| Visual Alarms |
Dual color red/blue flashing LEDs in gas hazard |
| Vibration Alarm |
Internal |
| Display |
Custom LCD with backlight, with display of gas concentration. Graphic symbols for battery (with proportional indication of remaining operation time) and display mode. Start up indication when calibration is due within 30 days, calibration overdue or service required. |
| Display Mode |
Normal display for real time gas concentration levels. Display recall for Peak readings and TWA. |
| Datalogging |
Full timed datalogging with adjustable sample rate, set to 1 minute data rate, 900 hours storage at 1 minute interval, 5000+ capacity event logging to record all instrument events including: Switch on/off, battery status, alarms activate/clear including peak values of response, gas test pass or fail, all events are time stamped. |
| Battery Type |
Rechargeable: Li-ion battery |
| Non-rechargeable: Lithium cell |
| Operating Time* |
Rechargeable: 12 hours minimum for flammable unit |
| Non-rechargeable: Up to 2 years |
| Sampling |
Optional manual aspirator |
| Operating Temperature |
-4 to 131°F |
| Humidity |
0-99% RH non-condensing |
| Intrinsically Safe |
Class 1, Div 1, Groups A, B, C, D |
| Ingress Protection |
IP65/IP67 |
| PC Interface |
RS232 connection from interface module in charger, RS232/USB convertor available |
| Autocalibrator |
Gasman can be routinely calibrated using the Crowcon Autocalibrator II in conjunction with the PC software |
| Size |
3.5" H x 1.9" W x .95" D |
| Weight |
Flammable: 130g |
| Oxygen: 100g |
| Toxic: 90g |
*Note: Operating time will depend on operating pattern and alarm occurrence. Frequent or long lasting alarms and use of the optional confidence beep will reduce battery life.
Sensor Specifications
|
Gas
|
Range
|
Alarm
|
Response Time
|
| Ammonia |
0-50 ppm
|
25 ppm
|
20 seconds
|
|
0-1,000 ppm
|
25 ppm
|
20 seconds
|
| Carbon Monoxide |
0-500 ppm
|
35 ppm
|
20 seconds
|
|
0-1,500 ppm
|
35 ppm
|
20 seconds
|
| Chlorine |
0-20 ppm
|
0.5 ppm
|
20 seconds
|
| Combustible |
0-100% LEL
|
10% LEL
|
20 seconds
|
| Flourine |
0-1 ppm
|
0.1 ppm
|
20 seconds
|
| Hydrogen |
0-1,000 ppm
|
n/a
|
20 seconds
|
| Hydrogen Cyanide |
0-25 ppm
|
5 ppm
|
20 seconds
|
| Hydrogen Chloride |
0-10 ppm
|
1 ppm
|
20 seconds
|
| Hydrogen Fluoride |
0-10 ppm
|
1 ppm
|
20 seconds
|
| Hydrogen Sulfide |
0-50 ppm
|
10 ppm
|
20 seconds
|
|
0-500 ppm
|
10 ppm
|
20 seconds
|
| Nitrogen Dioxide |
0-10 ppm
|
3 ppm
|
20 seconds
|
| Nitric Oxide |
0-100 ppm
|
-
|
20 seconds
|
| Oxygen |
0-25% Vol
|
19% (low),
23% (high)
|
10 seconds
|
| Ozone |
0-1 ppm
|
0.1 ppm
|
20 seconds
|
| Phosgene |
0-1 ppm
|
0.1 ppm
|
20 seconds
|
| Phosphine |
0-5 ppm
|
0.2 ppm
|
20 seconds
|
| Sulfur Dioxide |
0-10 ppm
|
2 ppm
|
20 seconds
|
Each unit includes a calibration flow cap, pocket clip and instruction manual. The Combustible Gasman is supplied with rechargeable batteries and requires a charger, price does not include charger. The Gasman for Oxygen and Toxic can be supplied with disposable or rechargeable batteries, please specify. Optional accessories include alligator clip, universal harness plate, shoulder strap, chest harness or aspirator assembly. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com
| Description |
Catalog No.
|
| Gasman for Oxygen |
Gasman OX
|
| Gasman for Carbon Monoxide |
Gasman CO
|
| Gasman for CO, 0-1,500 ppm |
Gasman CO HI
|
| Gasman for Hydrogen Sulfide |
Gasman H2S
|
| Gasman for H2S, 0-500 ppm |
Gasman H2S HI
|
| Gasman for Methane, 0-100% LEL Methane |
Gasman CH4
|
| Gasman for Propane, 0-100% LEL Propane |
Gasman C3H8
|
| Gasman for Pentane, 0-100% Pentane |
Gasman C5H12
|
| Gasman for Butane, 0-100% Butane |
Gasman C4H10
|
| Gasman for Hydrogen, 0-100% Hydrogen |
Gasman FL H2
|
| Gasman for Sulfur Dioxide |
Gasman SO2
|
| Gasman for Chlorine |
Gasman CL2
|
| Gasman for Chlroine Dioxide |
Gasman CLO2
|
| Gasman for Nitrogen Dioxide |
Gasman NO2
|
| Gasman for Phosphine |
Gasman PH3
|
| Gasman for Hydrogen |
Gasman H2
|
| Gasman for Ammonia |
Gasman NH3
|
| Gasman for Ammonia, 0-1000 ppm |
Gasman NH3 HI
|
| Gasman for Hydrogen Cyanide |
Gasman HCN
|
| Gasman for Hydrogen Fluoride |
Gasman HF
|
| Gasman for Hydrogen Chloride |
Gasman HCL
|
| Gasman for Ozone |
Gasman O3
|
| Gasman for Fluorine |
Gasman F2
|
| Gasman for Nitric Oxide |
Gasman NO
|
| Gasman for Phosgene |
Gasman COCL2
|
| Gasman for CO2, Infrared, 0-5% |
Gasman CO2
|
| Charger |
C01941
|
| Alligator Clip |
M02340
|
| Harness Plate |
C01952
|
| Shoulder Strap |
C01843
|
| Chest Harness |
C01844
|
| Aspirator Assembly |
C01937
|
Downloads
|
|
|
|
