Monoxor II & III Carbon Monoxide Analyzer from Bacharach Inc.
Bacharach's Monoxor CO Analyzers is a hand held instrument designed to locate CO in ambient air as well a stack gases. The continuous sampling instrument quickly and accurately measures levels of CO between 0-2,000 ppm. The Monoxor II & III have a stainless steel probe with five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers. The Monoxor II is also available in a high range version (0-80,000 ppm) for vehicle emission testing and forklift tuning.
The Monoxor III has the same features as the II but with printing capabilities. You can download your test results to an optional wireless IrDA printer.
With the addition of the Breath Analysis Module (BAM) to the Monoxor II, it becomes a powerful tool in determining the presence and level of CO in the bloodstream.
Carbon Monoxide (CO) is a silent killer. Even in low concentrations, long term exposure can be harmful because CO holds on to the hemoglobin 200 times greater than oxygen. Tissues with the highest oxygen needs are most effected by CO including the brain, heart and other large muscles.
A toxic level of CO can remain in the blood for hours after exposure even though CO in the environment has dropped to acceptable levels. The Breath Analysis Module (BAM) interfaces to the Monoxor II and allows you to quickly and easily measure CO in breath levels. The Monoxor II BAM is a powerful tool in determining the presence and level of CO in the bloodstream, also known as carboxyhemoglobin.
To use the Monoxor II BAM simply attach the module to a Monoxor II. Have a person inflate the balloon through the mouthpiece. Allow a brief period of time for the sample to be analyzed then read the ppm CO from the display. The chart will convert ppm CO to % COHb.
The table shown is used to quickly and easily determine the correlation between breath CO and carboxyhemoglobin. The Monoxor II Breath Analyzer Module, in conjunction with the Monoxor II gives first responders a complete CO analysis, from people to sources.
Features
Quickly measures and displays low levels of CO from 0-2,000 ppm
Measures in increments of 1 ppm
Multi purpose strap for easy holding and mounting
Probe and hose assembly for stack gas testing
Highly visible digital display with backlight
Specifications - Monoxor III
Range
Low, 0-2,000 ppm
Resolution
1 ppm
Display
4 digit LCD with backlight
Accuracy
+/-5% of reading or 10 ppm whichever is greater
Operating Temperature
32-104°F
Probe: 1000°F at 5" ins
Power Source
4 AA batteries
Operating Life
24 continuous hours
Warm Up Time
60 Seconds
Printer Port
IrDA or HP protocol
Dimensions
7.5" L x 3.1" W x 2.1" H
Weight
16 ounces
Warranty
2 years
Specifications - Monoxor II
Range
Low, 0-2,000 ppm
High, 0-85,000 ppm
Resolution
1 ppm adjustable to zero
Display
4 digit LCD, low battery and over range indicator
Accuracy
+/-5% of reading
Operating Temperature
32-140°F
Probe: 1000°F at 5" ins
Power Source
4 C batteries
Operating Life
14 continuous hours
Warm Up Time
60 Seconds
Sensor Life
Typically over 4 years
Construction
High impact plastic
Dimensions
8.6" L x 3.5" W x 2.9" H
Weight
21 ounces
Warranty
2 years
Ordering Information
Each Monoxor II includes installed and calibrated CO sensor, probe & hose assembly, carrying strap, manual & case. Monoxor III includes probe & hose assembly & case. The Monoxor III Kit includes probe & hose assembly, case, printer, strap and manual. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826 eMail: sales@afcintl.com
