Home > Gas Detection Instruments > Calibration Supplies > Calibration Gas

Calibration Gas

Quality Assurance of Calibration Mixtures

Our gas mixtures for filling disposable pressure vessels are produced gravimetrically (by weight) using sensitive modern balances capable of weighing the relatively heavy cylinders to accuracies of +/- 0.1 gm. This equipment allows direct measurement of cylinder content during filling and eliminates potential errors associated with indirect, manometric (pressure bases) mixing techniques. Which are subject to inaccuracies due to temperature gas compressibility's and non-ideal behavior.

The weights used to calibrate the balances are all traceable to national physical laboratory (NPL) and NIST standards which ensures standard gas mixtures are of the highest possible accuracy. High purity precursor gases are used to ensure gravimetric filling calculations hold true.

The certification accuracy of gravimetric mixtures is dependent on the concentration levels of particular components and on molecular weights. Typically, the accuracy for a given concentration is:

Concentration
Certified Accuracy
5 to 10 ppm
Depends on components (typically +/-10%)
10 ppm to 50 ppm
+/-5%
50 ppm to 1%
+/-2%
1% to 10%
+/-2%
10% to 50%
+/-2%

Our non-refillable products are labeled with the nominal concentration requested by customers. We do not use the exact values from the production process. Thus, there is a tolerance which must be applied to this figure, which is typically:

Concentration
Tolerance
10 ppm to 50 ppm
+/-20%
51 ppm to 1%
+/-10%
1% to 10%
+/-10%
10% to 50%
+/-5%

Where analytical work is required to certify minor components, the accuracy is plus or minus +/-2%.

Our non-refillable pressure vessels are filled and supplied in accordance with out ISO 9001 procedures. All incoming materials are checked and inspected for conformance to agreed specifications. All dispatched products are inspected for quality and aesthetics.

Cylinder Specifications

103L Cylinders
Contents 103L (3.6 cu ft) @ 70°F & 1000 psig
Dimensions 13.6" x 3.3"
Water Capacity 1.52 L
Material Steel
Weight 48 oz (3 lb)
Valve Inlet 5/8" - 18 UNF (C10)
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Non-Reactive Gases

74L Cylinders

Contents 74L (8.0 cu ft) @ 70°F & 500 psig
Dimensions 14.25" x 4.25"
Water Capacity 2.2 L
Material Aluminum Alloy
Weight 2 lb 5 oz
Valve Inlet 5/8" - 18 UNF (C10)
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Reactive Gases

58L Cylinders

Contents 58L (2.0 cu ft) @ 70°F & 500 psig
Dimensions 14.25" x 3.5"
Water Capacity 1.72 L
Material Aluminum Alloy
Weight 1 lb 12 oz
Valve Inlet 5/8" - 18 UNF (C10)
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Reactive Gases

34L Aluminum Cylinders

Contents 34L (1.2 cu ft) @ 70°F & 500 psig
Dimensions 10.64" x 3.125"
Water Capacity 0.9 L
Material Aluminum Alloy
Weight 1 lb 14.9 oz
Valve Inlet 5/8" - 18 UNF (C10)
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Reactive Gases

34L Steel Cylinders

Contents 34L (1.2 cu ft) @ 70°F & 500 psig
Dimensions 10.75" x 2.9"
Water Capacity 0.9 L
Material Steel
Weight 1 lb 8 oz
Valve Inlet CGA 600
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Non-Reactive Gases

17L Cylinders

Contents 17L (0.6 cu ft) @ 70°F & 240 psig
Dimensions 10.75" x 2.9"
Water Capacity 1 L
Material Steel
Weight 114 oz
Valve Inlet CGA 600
Transport UN 1956 Compressed Gas NOS
Approval DOT 39
For Non-Reactive Gases

Gases Available

The following gases are available from AFC International in single or multigas combinations. We can custom mix certain gases for your requirements. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com.
Ammonia Benzene
Butane Carbon Dioxide
Carbon Monoxide Chlorine
Ethylene Ethylene Oxide
Freon Hexane
Hydrogen Hydrogen Sulfide
Isobutylene Methane
Nitric Oxide Nitrogen
Nitrogen Dioxide Oxygen
Pentane Propane
Propylene Sulfur dioxide
Toluene Zero Air
New Products | Air Sampling | Gas Detection | Other Meters | Respiratory | Water Quality | WMD HazMat
Applications | Product Specials | Rentals | Links | Index | Contact Us | Home


AFC International, Inc.
PO Box 894, DeMotte, IN 46310
715 SW Almond St, Ste C, DeMotte, IN 46310
800-952-3293 219-987-6825 Fax 219-987-6826
eMail: sales@afcintl.com

Last Revised: 10/4/07